EDNord Fastback 9 Specifications download pdf (Page 13)

FASTBACK 9 USER’S MANUAL, 203860 Rev. A 13

BINDING A DOCUMENT

WITH HALFBACK™ COVERS

VIII

1. Switch to HALFBACK mode (see Section VII, page 16). If the

machine is already in HALFBACK mode, the display will read:

“READY TO BIND” … “HALFBACK.”

2. Select your Halfback cover according to your document thickness:

10 - 100 sheets = Narrow Halfback

101 - 200 sheet = Medium Halfback

(This may vary slightly depending on the paper and cover thickness.)

• HINT: If you are not sure which Halfback width to use, simply

place your document in the binding recess and push the BIND

button. The correct width will be shown on the display.

• NOTE: Youcanaddacustominkjet-printeddesignortitleto

the front and spine of your Halfback cover. Follow the instructions

included in your Halfback box.

3. Form your Halfback front cover into an “L” shape, by folding it along

the score mark closest to the cover edge. Make sure adhesive side

facesinward.Placethedocumentpagesontheshortapsothey

are sitting on the un-melted adhesive. Put the back cover in place

(gure12).

4. Tampyourdocumentcoverandpagesonthefrontatsurface

of the housing so that they are straight. Place your assembled

document into the binding recess and slide it all the way to the right

(gure13).Tapthedocumentonthetopandthelefttoensureall

pages are even.

5. Pushthepagesbackwardtoensureproperbinding(gure14).

Check that the document edge aligns with the edge of the Halfback

cover.

6. PresstheBINDbutton(gure15).Thebindingprocesswillbegin.

7. Assoonasthedisplayashes“REMOVEBOOK,”pickupthe

documentandplaceitagainstacoolingfence(gure16).Letitcool

forveminutes.

• NOTE: Stoppingthebindingprocess:Duringtherstseveral

seconds of the binding cycle, you can push the OPEN button (the

orange button closest to the front) to abort the whole process

and open the document clamps. Use a new binding strip when the

process resumes.

• NOTE: Forproperbindingresults,theHalfbackspineapmustnot

be too curled prior to insertion in the binder. Flatten the spine by

hand if necessary.

F I G U R E 12

F I G U R E 13

F I G U R E 14

F I G U R E 15

F I G U R E 16

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 29 30

Comments to this Manuals

No comments

EDNord Fastback 9 Specifications Page 13

Comments to this Manuals