EDNord QMS magicolor Installation Guide Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
++ 
!,+
"
4 Remove the orange protective cover
from each cartridge.
Caution:
Each toner cartridge has a colored label that corresponds to a colored
label to the right of the cartridge slots. Always install the toner cartridge in the slot
with a label of the same color.
5 Install the four toner cartridges.
Caution:
If a toner cartridge doesn’t
slide in easily, don’t force it. In addition,
don’t push it in until you hear a click. If
you hear a click, you’ve locked it into
place against the OPC belt cartridge
and your prints may be smudged.
Align the toner cartridge with the car-
tridge guides, and gently push the car-
tridge until you begin to feel resistance.
Then pull the cartridge back approxi-
mately 1/4 inch.
»Note:
While the cartridge may not
appear to be completely installed,
gently closing the front door of the
printer will secure the cartridges in their
proper operating position.
!)
/!
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Page view 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 59 60

Comments to this Manuals

No comments