EDNord QMS magicolor Plus Installation Guide download pdf (Page 15)

Setting up Your Printer

Installing the OPC Belt Cartridge

The OPC (Organic Photo Conductor) belt cartridge forms the image that is

developed and transferred to the media.

Attention

The OPC belt is extremely

sensitive to bright light, direct

sunlight, and touch. Always

leave it in its protective box until

you’re ready to install it. Any

exposure to light should be limited to less than two minutes, or

permanent damage could result.

Also, handle the cartridge carefully so you don’t touch the surface (the

green part) of the belt. The belt is extremely sensitive to hand oils and

scratches, both of which reduce print quality. This type of damage is not

covered by the product warranty.

Open the printer’s

top cover.

If you install a duplex

unit later, you must

always open the duplex

unit’s top cover first.

Rotate up the two lock

levers to prepare the open-

ing for the cartridge.

Remove the OPC belt

cartridge from its protec-

tive bag.

Pull out the two

tension-release

pins (A) (one on

each side of the

cartridge).

Remove the protec-

tive sheet (B) from

the cartridge.

The white powder lubricant on a new OPC belt is normal; it

won’t affect quality.

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 51 52

No comments

EDNord QMS magicolor Plus Installation Guide Page 15