EDNord QMS magicolor Plus Installation Guide download pdf (Page 12)

Setting up Your Printer12

Unpack the printer by cutting and removing the straps, and lifting off

the outer box.

strongly

suggest that you save the packaging materials in

case you ever need to move or ship the printer.

Remove the consumables kit.

Fold back the plastic protective bag from the printer.

With another person’s help, lift the printer from the pallet, and place it

in its intended location.

For best output quality and longest consumables life, place the

printer on a hard, flat, level (within 1.5°) surface capable of

supporting about 119 lbs (53.9 kg). A surface can be tested for

levelness with a standard round pencil. If the pencil rolls, the

surface is not level.

Remove the tape and shipping cardboard from the outside of

the printer.

Attention

During installation, do not plug in the printer’s power cord until told to

do so.

Installing the Toner Cartridges

Your printer uses four toner cartridges: black (K), yellow (Y), magenta (M),

and cyan (C).

Color Rated life @ normal 5%

coverage

(expressed in planes)

Initial starter toner cartridge Black

7,000

Yellow

4,250

Magenta

4,250

Cyan

4,250

Replacement toner cartridge Black

14,000

Yellow

8,500

Magenta

8,500

Cyan

8,500

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 51 52

Comments to this Manuals

No comments

EDNord QMS magicolor Plus Installation Guide Page 12

Comments to this Manuals

Related products and manuals for Print & Scan EDNord QMS magicolor Plus