EDNord QMS magicolor Plus Installation Guide download pdf (Page 6)

Getting Acquainted with Your Printer6

Location Requirements

„ On a hard, flat, level (1.5° or less slant at any point around the

machine) surface capable of supporting the printer, accessories, con-

sumables, and media. Weights are shown below.

A surface can be tested for levelness with a standard round

pencil. If the pencil rolls, the surface is not level. Clear the area

of any obstruction or items such as cables that might prevent

the printer from sitting directly on the flat, level surface.

„ In an area with an ambient temperature range of 50°–95° F (10°–

35° C) and relative humidity range of 20%–80% (noncondensating).

„ Away from cooling and heating sources, extreme temperature or

humidity changes, direct sunlight, excessive dust, corrosive chemicals

Top View

Component Weight

Printer

101 lbs (46 kg)

Consumables (such as toner,

OPC belt)

11 lbs (5.0 kg) (total)

Media

5.2 lbs (1.9 kg) per ream of 20 lb

bond (75 g/m

) paper

Lower feeder unit (each)

14.8 lbs (6.7 kg)

Duplex unit

5.3 lbs (2.4 kg)

015mati.eps

28 inches

(70 cm)

8 inches

(20 cm)

20 inches

(50 cm)

Front

4 inches

(10 cm)

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

1 2 3 4 5 6 7 8 9 10 11 ... 51 52

No comments

EDNord QMS magicolor Plus Installation Guide Page 6