EDNord QMS magicolor Plus Installation Guide download pdf (Page 7)

Getting Acquainted with Your Printer

or vapors (such as ammonia), water pipes, refrigerators, and

any strong electromagnetic field (such as that created by an air

conditioner).

If the printer is located in a cold room that is rapidly heated, or if the

printer is moved from a cold place to a warm, humid place, condensa-

tion may occur within the printer, degrading print quality. If this occurs,

allow the printer to adapt to the environment for about one hour

before use.

„ Away from open flames or items that can easily burn.

„ Away from water.

If using a humidifier or water vaporizer in the room with the printer, use

only purified or distilled water. Impurities in the water may be released

into the air, where they can accumulate inside the printer and cause

degraded printer output.

„ Away from items that produce excessive vibration.

„ At an altitude of 0–8202' (0–2500 m).

„ Near your computer—6.5' (2 m) or less for an IEEE 1284 bidirectional

parallel connection; cables for other connections may be longer.

„ Close to an easily accessible grounded power supply on an exclusively

dedicated power outlet.

Attention

Do not connect the groundwire to gas or water pipes or grounding

for telephones.

„ Not connected to the same electrical outlet as noise-generating equip-

ment. If the printer is connected to the same circuit used by other

high-current machines, such as a copier or air conditioner, or to an

electrically noisy machine, low voltage or noise may cause overheat-

ing, computing errors resulting in data loss, and improper performance.

„ In a well-ventilated area, but away from wind.

„ With enough space to allow adequate ventilation and easy servicing.

WARNING!

Obstructing the ventilation grilles could present a fire hazard.

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

1 2 3 4 5 6 7 8 9 10 11 12 ... 51 52

No comments

EDNord QMS magicolor Plus Installation Guide Page 7